Editorial, News, and Products
PTXPO 2023 Preview: Advancing the Mold With Featured Mold Component, Hot Runner Technology
There’s no doubt mold components and hot runners are important parts of the moldmaking industry. This preview gives mold buyers, mold builders and injection molders a look into PTXPO exhibitors displaying these technologies at the show.
Husky Technologies Showcases Innovation Injection Mold Solutions at MD&M West 2023
This week, MD&M/Plastec West attendees can survey Husky’s latest technologies and services engineered for medical device manufacturers.
Revisiting Some Hot Runner Fundamentals
What exactly does a hot runner do? If you’ve been in the injection molding industry for any length of time, you might think the answer is obvious, but it is not.
How to Solve Hot Runner Challenges When Molding with Bioresins
A review of the considerations and adaptations required to design hot runners and implement highly productive injection molding operations.
MMT Ask the Expert: How to Succeed with Complex Resins Such as Bioresin and PCR in Injection-molded Applications
In this Ask the Expert brought to you by Husky, Sheldon Alexander answers questions about complex resins. The use of complex resins such as bioresins instead of petroleum-based resins continues to trend in our industry, and it is important to understand the challenges that can arise. This episode is brought to you by Husky, Melt to Mold Precision.
MMT Ask the Expert: Hot Runner Benefits and the Fundamentals of Maintenance and Refurbishment
In this next portion of our “Ask the Expert” series, Husky’s Derrick Hennebicque answers some FAQs about the advantages of hot runner systems and refurbishment strategies. This episode is brought to you by Husky, Melt to Mold Precision.
MMT Ask the Expert: Servo Control and Hot Runner Temperature Controller Best Practices
In this portion of our “Ask the Expert” series, Husky’s Vernon Moss answers some frequently asked questions on servo control and hot runner controllers. This episode is brought to you by Husky, Melt to Mold Precision.
MMT Ask the Expert: How to Optimize System and Hot Runner Balance
In the first portion of our “Ask the Expert” series, Husky’s Sheldon Alexander answers some frequently asked questions on the fundamentals of system and hot runner balance and how to overcome challenges. This episode is brought to you by Husky, Melt to Mold Precision.
Second-Generation Control Algorithm Elevates Mold Controller Performance
Husky launches a new control algorithm for its line of Altanium mold controllers, with 42% faster heat-up times, 30% less energy use and reported 64% increased productivity.
Thermally Sensitive or Corrosive Applications are Combatted by Hot Runners
Combined with Husky Technologies’ experience, guidelines and analysis tool, the company’s new UltraMelt hot runner technology meets the processing needs of challenging resins and demanding applications.
Learn About Industry Topics and Emerging Technologies at PTXPO
Aside from being a great opportunity to network with other industry professionals, PTXPO will have numerous educational sessions about hot topics and emerging technologies.
Real-Time Monitoring Service Added as Standard Feature to PET and Closure Systems
Husky Injection Molding Systems includes Advantage+Elite as a standard system feature on all PET and Closure systems to accelerate the shift of producing increasingly sustainable packaging.
Amerimold 2021 Post-Show Flashback: Build
MMT looks back on the return of an in-person Amerimold in September after a year-long pandemic.
Husky Introduces UltraShot Hot Runner Injection Molding System
Amerimold exhibitor features the advanced technology which permits more precise melt control and the ability to produce identical, repeatable performance in every cavity.
Servo Control Feature Facilitates Precise, Controlled Mold Actuation
Husky’s electric servo control feature for the Altanium mold controller series serves to increase mold life and provides instant access to motion performance.
Melt Delivery and Control System Enables Ultimate Design Freedom
Scalable to 128 cavities, Husky’s UltraShot Injection System offers the injection molding process unconstrained part design and risk-free scalability.
Husky Launches Interactive, Digital Experience
Experience Husky, a two-day digital experience taking place Jan. 13-14, 2021, will give attendees the opportunity to engage and network with Husky experts.
Adaptive PET Preform Mold Meets Fluid Production Requirements
To meet continuously changing consumer demands, Husky highlights the NexPET system which supports a wider variety of applications, more SKUs, shorter production runs and more frequent design changeovers.
How to Use Hot Runner Balance in Mold Qualification
If you are interested in the impact of system and hot runner balance on part quality, the causes of unbalanced hot runner systems and short shot parts, the procedure for measuring system balance and the impact of application specifics on system and hot runner balance expectations, then tune into this on-demand webinar.
Valve Gate Nozzle Offers Exceptional Wear Resistance
Adding to Husky Injection Molding Systems’ Ultra Helix Valve Gate nozzle lineup, the Ultra Helix 250 T2’s advanced design minimizes wear, provides high gate quality and longevity.
Customizable Mold Controller Meets Adaptive Equipment Needs
Husky Injection Molding Systems’ most recent Altanium Neo5 mold controller provides a Basic and Advanced setting to tailor to an operator’s specific needs and skill level.
Mold Controllers with Virtual Network Computing Enables Remote Access
Husky Injection Molding System’s Altanium mold controllers are now available with virtual network computing (VNC) options.
Husky Appoints Customer Success Management Organization Leader
Husky Injection Molding Systems announces the appointment of Tony Black to the position of president, customer success management.
Noteworthy News: Growth Spurts
From new facilities dedicated to automation, training and distribution to new hires eager to tackle building relationships through providing excellent customer service, the industry innovators below are growing all across the United States, Canada and Mexico.
Noteworthy News: Giving Back
It’s a time for giving thanks, so send a shout out to companies like DMG MORI, Big Kaiser, Mazak Corp., Mitutoyo America Corporation, Husky Injection Molding Systems and more for giving back to their communities and industry!
Husky Highlights Commitment to Sustainable Packaging Solutions
Husky Injection Molding Systems highlights its commitment to sustainable packaging solutions for future generations.
Noteworthy News: Congrats are in Order
From anniversaries to new hires to awards, MoldMaking Technology has the latest news in industry success stories.
Husky Announces Organizational and Leadership Changes
Husky Injection Molding Systems announces organizational and leadership changes to its hot runners, controllers and medical business.
Getting Hot and Heavy during a Little Hot Runner Training
If a mold is the heart of a molding system, then the hot runner system is the heart of a hot runner mold, and I recently learned that there is a lot to know when it comes to designing and maintaining these systems to ensure optimal mold and part quality and performance.
Tech Trends: K 2019 Sneak Peek, Part 4
Here’s just a quick sneak peek at some of products exhibitors like Husky, Frigel, Barnes Molding Solutions brands and Hasco will be displaying in their booths at K 2019.
Injection Molding Solutions Designed to Meet Global Demands for Plastic Production
Husky Injection Molding Systems will feature solutions for every market need, focusing on new, innovative technologies that meet the changing global demands of plastic producers at K 2019.
Tooling Technologies Offer Value, Productivity and Flexibility
Husky will be running its new HyPET HPP5e system at K 2019, designed to delivering better energy savings, system reliability, preform quality and user friendliness.
MoldTrax Hot Runner Extravaganza Delivers on Expertise and Education
The “Who’s Who” in processing and hot runner technologies turned out to educate attendees with well-honed wisdom and experience.
Husky's Mexico World Tour Event Reinforced Commitment to Customers
On May 15, 2019, Husky Injection Molding Systems hosted a one-day Husky World Tour event in Santa Fe, Mexico that demonstrated the company’s strong commitment to the region’s customers and dynamic market.
Husky Injection Molding Names CFO
Husky Injection Molding Systems appoints John Hafferty to the position of CFO.
2018 Technology Review and Sourcing Guide: Hot Runners
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including hot runners.
Multi-Layer Technology Opens Opportunities for Packaging
Husky features a range of solutions for the beverage, food, closure, medical, automotive and home, personal and beauty markets.
NPE2018 Video Recap: Exhilaration, Innovation and Inspiration
MoldMaking Technology’s editorial team recaps some highlights from the show floor at NPE2018, including a technology slideshow, seven podcasts recorded live from the event and a video.
Injection Molding System Featured
Husky occupies a 12,000 square-foot space at NPE2018 and features a range of solutions for the beverage, food, closure, medical, automotive and home, personal and beauty markets.
Platinum Equity Acquires Husky Injection Molding Systems
Platinum Equity and Husky Injection Molding Systems close on acquisition agreement.
Successful Supplier Nights Help "Mold" Careers
The Chicago Chapter of the American Mold Builders Association (AMBA) recently hosted its fourth successful supplier night fundraiser that continues to provide much-needed support for promoting careers in moldmaking.
Hot Runner Technologies Aim to Simplify Moldmakers’ Approaches
Hot runner suppliers are developing solutions that remove complexities from the way that moldmakers and molders design, control and maintain their processes.
Throwback Thursday: How to Prevent Hot Runner Leaks
One of the more common concerns still expressed by molders today about hot runner molds is the threat of a leak of molten plastic causing the manifold pocket to fill. Here is a throwback to an article on leak prevention focused on externally heated hot runner systems.
Husky Strengthens Its PET Tooling Business
Husky is bringing its patented HyPET HPP5 technology to legacy systems and tooling generations to add value and capability for customers.
Mexico: Manufacturing Mecca to the South
A mold-building perspective on Mexico’s manufacturing opportunities, trends and challenges.
Optimize High-Performance Polymer Molding
When molding high-temperature resins, direct gating with a hot runner system can save molders time and money.
SLIDESHOW: Technology Showcase, MMT Surprise
This week's slideshow is an MMT 'Surprise' Showcase, editor’s picks for the week.
SLIDESHOW: Technology Showcase, After K
By all accounts K 2016 was a success. According to show management, attendees were delighted with the wealth of new technical developments presented by raw materials producers, machinery manufacturers and producers of semi-finished and technical parts. Here are some technology highlights.
SLIDESHOW: Technology Showcase, A K 2016 Preview
As K 2016 quickly approaches, we’re providing a preview of a few of the products that will be featured there from October 19-26 in Düsseldorf, Germany.
Cleaning in a Flash
Self-cleaning technology uses controlled flash to make mold maintenance faster, easier and safer.
A Look at Self-Cleaning Mold Technology
A self-cleaning mold feature helps to eliminate hundreds of hours of mold maintenance a year, while reducing the risk of damage to the mold and making the cleaning process safer.
Direct Side Gating
Mold builders and molders should carefully consider hot runner selection, as it dramatically impacts an injection molding system’s speed, quality and uptime.
Achieving Accurate Temperature Control with Your Hot Runner Controller
The right hot runner controller is key to producing high-quality, complex medical parts.
Compatibility Makes Technology Upgrade a No-Brainer
The ability to employ previous-generation tooling is just one of many notable features of Husky's latest PET preform injection molding system.
Husky World Tour Stops in Brazil
Reinforces company’s commitment to providing local products, services and support to help customers maximize productivity and reduce variability.
Case Study: Hot Runners
New Hot Runner System Solves Side-Gating Issues
Selecting a Valve Gate Hot Runner
A look at valve gate plate actuation technology for consistent part filling, excellent gate quality and close nozzle spacing.
The Right Side-Gating Solution Delivers Maximum Value to Your Customers
When it comes to side-gate hot runners, it is important to look at the options, their benefits and then compare against your customer’s needs.
Collaboration Leads to Complete Turnkey System
To meet the special needs of this project, ICU, Husky and Tech Mold worked together to design a complete turnkey system—including machine, mold, hot runner and temperature controller.
Going Beyond the Basic “Blue Box”
The old blue box temperature controller is simply no longer an acceptable option for many molding operations.
Gain Access to the Recession-Proof Medical Market
Moldmakers who want to diversify into medical—or maintain their competitive edge—need up-to-date, high-tech engineering and fabrication capabilities in order to meet the toolmaking industry’s most stringent quality standards.
Trends in Hot Runner Technology
Quality, performance, maintenance and flexibility are driving today’s hot runner technology.
Preform Mold Technology Increases Flexibility, Reduces Cost
A flexible and cost-effective PET system featuring modular, low cavitation PET preform molds reduces both conversion costs and mold changeover time.
Complex Molds Mean Business for High-Tech Toolmakers
Focus on cavitation and advanced product design gives progressive mold shops a jump on competitors.
Electrically Actuated Valve Gates: An Emerging Hot Runner Technology
Electrically actuated valve stems promise more control, cleaner actuation, closer pitch spacing, higher quality gates and reduced maintenance.
Lean Manufacturing Trims Leadtimes
Moldmakers aren't the only ones reducing leadtimes. Component and hot runner suppliers are delivering their equipment and supplies faster to accommodate industry demand.
Complex Parts Put a Premium on High-Tech Mold Design
Equipment and component suppliers are developing a range of products for advanced moldmaking needs.
Hot Runner Application Review Leads to Successful Processing
Successful application of a hot runner in the molding environment requires detailed analysis of gating styles, resin and molder expectations.
New PET Bottle Standard May Boost Business for Moldmakers
A rule to lightweight preform necks and closures could require more than 1,000 new molds.
High Cavitation Molds Promote Economies of Scale
Toolmakers are developing increasingly complex molds for high production of thinwall parts.
Hot Runners Shrink Leadtimes, Cut Costs
Standardized hot runner system allows the moldmaker to easily configure a system in just two weeks.
Advances in Hot Runner Systems Drive Innovations in Part Engineering and Styling
Design and performance capabilities of components fabricated in state-of-the-art molds enhance the appeal of new vehicles.
Get the Most from Your Tooling Investment
Alignment, mold protection, tonnage distribution and injection control are the main elements in the molding machine that could affect your tooling investment.
Maintaining a Strong Relationship with Your Hot Runner Supplier
Once your hot runner supplier is chosen, you need to take the proper steps to maintain a mutually beneficial, long-term relationship.
Advancing Mold Performance Using Hot Runner Technology
A quality hot runner system is one of the more important enhancements you can incorporate into a mold to improve molded part quality, reduce production times and remain price competitive.
The Value of a Well Engineered Mold Base
High-quality mold bases can help moldmakers maximize output and uptime.
Q&A with Robert Schad, Husky
Husky Injection Molding Systems' CEO speaks frankly about his company's success, the state of the industry and where moldmaking is headed.
How to Design Hot Runner Plates
Moldmakers are often required to design and make hot runner plates for molds. Being aware of these best practices can make the process easier.
How Can Small Moldmakers Increase Sales?
MoldMaking Technology's readers share their opinions on how a small moldmaker should handle sales.
Why Choose a Valve-Gated Hot Runner?
Moldmakers need to be aware of how different gating technology can affect their customers when designing a hot runner system into a mold.
How to Prevent Hot Runner Leaks
One of the most common concerns expressed by molders about hot runner molds is the threat of a leak of molten plastic causing the manifold pocket to fill.